- ページ 13
冷蔵庫 AEG AEG SANTO S 70178 TK38のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG AEG SANTO S 70178 TK38 24 ページ。 Electrolux refrigerator operating instructions
Using the Appliance
Starting your appliance and temperature control
1. Insert the plug into the wall socket.
2. Press the ON/OFF button. The green control light is on.
3. Press the "+" (3) or "-" (5) button. The temperature display switches to
showing the set temperature.
Note: Concerning secure food storage temperatures, a refrigerator
temperature of 5°C can be regarded as cold enough.
4. The compressor starts and continues to work automatically.
Attention! When you change the settings, the compressor will not start
immediately if it is doing automatic defrosting at the same time.
5. Since the refrigerator quickly reaches the storage temperature after being
switched on, you can place the food in immediately.
Control panel
1.ON/OFF control light (green)
2.ON/OFF switch
3.Temperature setting buttons
(to increase the temperature)
4.Temperature display
5.Temperature setting buttons (to decrease the temperature)
6.COOLMATIC indicator light (yellow)
7.Push button for COOLMATIC
Temperature control buttons
The
temperature
adjusted with the "+" (warmer)
and "-" (colder) buttons.
These buttons belong to the temperature display.
If you press the "+" (3) or "-" (5) button, , the temperature display will switch
from the actual temperature (constantly luminous temperature display field)
to the desired temperature (flashing temperature display field).
By pressing any of the two buttons the desired temperature can be modified
by 1°C.
can
be
13