- ページ 11

冷蔵庫 AEG AEG SANTO S 70178 TK38のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG AEG SANTO S 70178 TK38 24 ページ。 Electrolux refrigerator operating instructions

Electrical Connection

Any electrical work required to install

this appliance should be carried out by

a qualified electrician or competent

person. This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be

observed.

Electrical Requirements

Before switching on, make sure the

electricity supply voltage is the same as

that indicated on the appliance rating

plate.

The appliance is supplied with a 13 amp

plug fitted. In the event of having to

change the fuse in the plug supplied, a

13 amp ASTA approved (BS 1362) fuse must be used. Should the plug need

to be replaced for any reason. The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow:

Blue:

Brown:

The wire coloured green and yellow must be connected to the terminal

marked with the letter „E" or by the earth symbol

yellow.

The wire coloured blue must be connected to the terminal „N" or coloured

black. The wire coloured brown must be connected to the terminal marked

„L" or coloured red.

Upon completion there must be no cut, or stray strands of wire present

and the cord clamp must be secure over the outer sheath.

Important!The plug must still be accessible after the appliance has been

installed. The appliance should not be connected to the electrical supply

by means of an extension cable. In case that the electrical cable has to be

replaced, please contact your local Service Force Centre.

Warning! A cut off plug inserted into a 13 amp socket is a serious safety

(shock) hazard. Ensure that it is disposed of safely.

Earth

Neutral

Live

or coloured green and