AEG AEG SANTO S 70178 TK38 Gebruiksaanwijzing - Pagina 11
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG AEG SANTO S 70178 TK38. AEG AEG SANTO S 70178 TK38 24 pagina's. Electrolux refrigerator operating instructions
Electrical Connection
Any electrical work required to install
this appliance should be carried out by
a qualified electrician or competent
person. This appliance must be earthed.
The manufacturer declines any liability
should these safety measures not be
observed.
Electrical Requirements
Before switching on, make sure the
electricity supply voltage is the same as
that indicated on the appliance rating
plate.
The appliance is supplied with a 13 amp
plug fitted. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse must be used. Should the plug need
to be replaced for any reason. The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow:
Blue:
Brown:
The wire coloured green and yellow must be connected to the terminal
marked with the letter „E" or by the earth symbol
yellow.
The wire coloured blue must be connected to the terminal „N" or coloured
black. The wire coloured brown must be connected to the terminal marked
„L" or coloured red.
Upon completion there must be no cut, or stray strands of wire present
and the cord clamp must be secure over the outer sheath.
Important!The plug must still be accessible after the appliance has been
installed. The appliance should not be connected to the electrical supply
by means of an extension cable. In case that the electrical cable has to be
replaced, please contact your local Service Force Centre.
Warning! A cut off plug inserted into a 13 amp socket is a serious safety
(shock) hazard. Ensure that it is disposed of safely.
Earth
Neutral
Live
or coloured green and
11