- ページ 11

ソフトウェア Brother HL-730DXのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother HL-730DX 17 ページ。 Quick setup guide - english
Brother HL-730DX にも：操作マニュアル (25 ページ)

ページを印刷する

English: HL-YL Quick Setup Guide, Body

Action 6-2: Prepare Windows 3.1 for the Printer

Setting Up Windows 3.1 for the Printer

You need to configure Windows 3.1 for the printer by installing the printer driver and

TrueType-compatible fonts from the supplied disk into Windows 3.1.

Because the supplied printer driver and fonts are compressed on the disk, be sure to use the

supplied installer program to install them. These instructions assume you will install the

driver and fonts from the disk drive A.

1. Start Windows 3.1.

2. Insert the supplied disk for Windows into your floppy disk drive.

3. Choose Run from the File menu in the Program Manager.

4. Type the drive name where you inserted

the supplied disk and "SETUP" in the

box: for example, A:\SETUP. Click the

OK button or press the Enter key.

5. The installer program will begin. Follow the instructions on the computer screen.

(Be sure to restart Windows when the installation process is completed.)

NOTE

The installer automatically updates your SYSTEM.INI Windows file by adding

DEVICE=bi-di.386 under the [386Enh] section. If any bi-directional parallel

communications device driver has previously been installed, it will be deactivated by this

new driver. If you want to use the driver that was previously installed, you should re-install

your previous driver. However, re-installing the previous driver will make the HL-700

series driver inactive.

The installer makes the installed printer driver the Windows default.

The installer automatically sets the printer port to the parallel interface, LPT1.

During this installation, changes have been made to the SYSTEM.INI file. It is necessary

to restart Windows so that the changes become effective and the installed bi-directional

parallel communications device driver can take effect.