- ページ 12

ソフトウェア Brother HL-730DXのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother HL-730DX 17 ページ。 Quick setup guide - english
Brother HL-730DX にも：操作マニュアル (25 ページ)

ページを印刷する

English: HL-YL Quick Setup Guide, Body

Action 6-3: Prepare DOS for the Printer

How to Use the Printer in Your DOS Application Software (without using the

Windows system)

Before working with application software that runs in DOS, if you do not already have a

suitable driver installed, you will need to install a printer driver that matches one of the

following supported emulations: HP LaserJet IIP, EPSON FX-850, or IBM Proprinter XL

printers.

The following table shows combinations of printer drivers and printer emulation mode. To get

the most out of this printer, you should install an HP printer driver in your application

software.

Printer driver supported in your

application software

HP LaserJet IIP

HP LaserJet II

Epson

FX-850

Epson FX-80

IBM

Proprinter

IBM Proprinter

NOTE

The best or recommended printer driver is indicated in bold.

Be sure to choose the correct printer driver in your application software. Failure to do so

may cause poor or inconsistent results.

Be sure that the printing resolution is set to 300 dpi in your DOS application software.

What Does Remote Printer Console Do?

The Remote Printer Console (RPC) is a utility program which runs in the DOS environment

and comprises the following two programs:

Remote Printer Console Main Program

This program allows you to change various printer settings such as emulation, print

quality, fonts, page setup and so on from your computer screen. Since most DOS

applications have a printer settings menu which overrides the settings made by the RPC,

you may not need to use this utility program. This utility program is useful for application

software which does not control the printer's settings and features.

Printer Status Monitor Program

This utility program can monitor your printer's status using bi-directional parallel

communications. If your printer has no paper, this utility program displays "Paper Empty"

error status and instructions for corrective action on your computer screen. This utility

program stays resident in your computer memory (Terminate-and-Stay Resident program)

and runs in the background.

™

(Only for HL-730 series Users)

Emulation mode to be selected with

the remote printer console program

HP LaserJet IIP emulation mode

Auto emulation selection

Epson FX-850 emulation mode

Auto emulation selection

IBM Proprinter XL emulation mode

Auto emulation selection