- ページ 14

プリンター Fujitsu fi-6670 SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu fi-6670 Series 26 ページ。 Image scanner
Fujitsu fi-6670 Series にも：ユーザーマニュアル (26 ページ), インストール手順マニュアル (6 ページ), パンフレット (2 ページ), 仕様 (2 ページ), スタートマニュアル (14 ページ), 消耗品の交換とクリーニング (22 ページ)

3) Gently close the Document Cover.

4) Change the position of the ADF.

AUTION

The ADF can be set to any of the following three positions:

After repositioning the ADF, be sure that the ADF is firmly locked to the new position.

■

Traditional (Factory default)

■

Standard (Space-saving type and for right-handed

operators)

Slide the ADF toward the center of the scanner.

Note the following explanation in this manual is based upon

this standard type of the scanner.

■

Reversed (Space-saving type and for left-handed

operators)

Slide the ADF toward the center of the scanner, and then

rotate it counterclockwise by 180 degree.

Attach the Stacker and the ADF Paper Chute to the scanner.

1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner.

2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner.

Protruding section

• Be careful not to pinch your fingers when moving the ADF.

• Never rotate the ADF by more than 180 degree. Doing so may damage the ADF.

Hook