- ページ 3

ソフトウェア Brother MFC-J825DWのPDF 安全マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J825DW 17 ページ。 Quick setup guide - spanish
Brother MFC-J825DW にも：マニュアル (12 ページ), マニュアル (21 ページ), 製品安全マニュアル (17 ページ), ウェブ・コネクト・マニュアル (22 ページ), クイック・セットアップ・マニュアル (45 ページ), クイック・セットアップ・マニュアル (42 ページ), トラブルシューティングマニュアル (6 ページ), (スペイン語）マニュアル (21 ページ), (スペイン語）マニュアル (16 ページ), (クイック設定ガイド (44 ページ)

DO NOT put the machine in a location where any slot or opening in the machine is obstructed

or blocked. These slots and openings are provided for ventilation. Blocking the machine's

ventilation could create a risk of overheating and/or fire. Instead:

• Place the machine on a solid surface, never on a bed, sofa, rug, or other similar soft surface.

• Do not place this machine near or over a radiator or heater.

• Do not place this machine in a "built-in" installation unless adequate ventilation is provided.

To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use

this bag in cribs, beds, carriages or play pens. This bag is not a toy.

CAUTION

Avoid placing your machine in a high-traffic area. If you must place it in a high-traffic area,

ensure that the machine is in a safe location where it cannot be accidentally knocked-over,

which could cause injury to you and serious damage to the machine.

Ensure that cables and cords leading to the machine are secured so as not to pose a tripping

hazard.

DO NOT place this machine on an unstable or tilted cart, stand, table or on any tilted/slanted

surface. The machine is heavy and may fall, causing injury to you and serious damage to the

machine.

IMPORTANT

• DO NOT place your machine next to sources of interference, such as speakers or the base

units of non-Brother cordless telephones. Doing so may interfere with the operation of the

machine's electronic components.

• DO NOT tip the machine after the ink cartridges are installed. Doing so may cause ink spillage

and internal damage to the machine.

• DO NOT connect your machine to an AC power outlet controlled by wall switches or automatic

timers. Disruption of power can delete information from the machine's memory, and repeated

cycling of the power can damage the machine.