Brother MFC-J825DW Manual de Segurança - Página 3

Procurar online ou descarregar pdf Manual de Segurança para Software Brother MFC-J825DW. Brother MFC-J825DW 17 páginas. Quick setup guide - spanish
Também para Brother MFC-J825DW: Manual (12 páginas), Manual (21 páginas), Manual de Segurança do Produto (17 páginas), Manual do Web Connect (22 páginas), Manual de configuração rápida (45 páginas), Manual de configuração rápida (42 páginas), Manual de resolução de problemas (6 páginas), (Espanhol) Manual (21 páginas), (Espanhol) Manual (16 páginas), (Inglês) Guia de configuração rápida (44 páginas)

DO NOT put the machine in a location where any slot or opening in the machine is obstructed

or blocked. These slots and openings are provided for ventilation. Blocking the machine's

ventilation could create a risk of overheating and/or fire. Instead:

• Place the machine on a solid surface, never on a bed, sofa, rug, or other similar soft surface.

• Do not place this machine near or over a radiator or heater.

• Do not place this machine in a "built-in" installation unless adequate ventilation is provided.

To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use

this bag in cribs, beds, carriages or play pens. This bag is not a toy.

CAUTION

Avoid placing your machine in a high-traffic area. If you must place it in a high-traffic area,

ensure that the machine is in a safe location where it cannot be accidentally knocked-over,

which could cause injury to you and serious damage to the machine.

Ensure that cables and cords leading to the machine are secured so as not to pose a tripping

hazard.

DO NOT place this machine on an unstable or tilted cart, stand, table or on any tilted/slanted

surface. The machine is heavy and may fall, causing injury to you and serious damage to the

machine.

IMPORTANT

• DO NOT place your machine next to sources of interference, such as speakers or the base

units of non-Brother cordless telephones. Doing so may interfere with the operation of the

machine's electronic components.

• DO NOT tip the machine after the ink cartridges are installed. Doing so may cause ink spillage

and internal damage to the machine.

• DO NOT connect your machine to an AC power outlet controlled by wall switches or automatic

timers. Disruption of power can delete information from the machine's memory, and repeated

cycling of the power can damage the machine.