- ページ 16

プリンター Fujitsu N7100のPDF 消耗品の交換とクリーニングをオンラインで閲覧またはダウンロードできます。Fujitsu N7100 20 ページ。
Fujitsu N7100 にも：はじめに (24 ページ)

N7100 C

ONSUMABLE

EPLACEMENT AND

LEANING

NSTRUCTIONS

LEANING

NSIDE THE

Ultrasonic sensor (x2)

Clean lightly with a soft cloth to wipe their surfaces clean. If you have

trouble wiping them with the cloth, use a cotton swab.

Idler roller (x4)

Gently rotate the idler rollers by hand as you wipe them clean. Take care

not to damage the soft rubber. The idler rollers should be cleaned

carefully and thoroughly, as dirty idler rollers can adversely affect the

paper pickup performance.

Glass (x2)

Clean lightly with a soft cloth to wipe their surfaces clean.

HINT

If the glass is dirty, a vertical line may appear on the scanned image.

Pick roller (x2)

Gently wipe the dirt and dust off from along the slots on the surface of

the roller as you rotate it manually. Take care not to damage the soft

rubber. The pick roller should be cleaned carefully and thoroughly, as a

dirty pick roller can adversely affect the paper pickup performance.

Feed roller (x2) and eject roller (x2)

When cleaning, turn on the power and let the feed rollers and eject

rollers rotate.

1 Connect the power cable, and turn on the scanner.

ATTENTION

The scanner needs to be on only when cleaning the feed rollers and

eject rollers.

(

CANNER

CONT