- ページ 21

ソフトウェア Brother Quattro 6000DのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Brother Quattro 6000D 29 ページ。 Kit de actualización iii
Brother Quattro 6000D にも：マニュアル (42 ページ), 操作マニュアル (50 ページ), 操作マニュアル (6 ページ), ユーザーマニュアル (48 ページ), 操作マニュアル (21 ページ), (取扱説明書 (49 ページ), (取扱説明書 (21 ページ), (取扱説明書 (48 ページ)

HOW TO USE NEW FEATURES

Displaying the Fabric While Aligning

the Embroidery Position

The fabric hooped in the embroidery frame can be

displayed on the LCD so that the embroidery position

can be aligned.

This feature can be used from the sewing screen of

embroidery mode and the edit and sewing screens of

embroidery edit mode.

As an example, the following procedure is described

using the edit screen of the embroidery edit mode.

Note

• When embroidery frame (small: H 2 cm × W 6 cm (H

1 inch × W 2-1/2 inches)) is installed, the built-in

camera cannot be used to align the embroidering

position. Install medium embroidery frame or larger.

• For details on using thicker fabric such as quilting,

refer to "Positioning the pattern on thick fabric"

(page 22).

Hoop the fabric in the embroidery frame, and

then attach the frame to the embroidery

machine.

Select the pattern, and then press

Note

• Check page 8/8 of Settings screen to make sure the

Fabric Thickness Sensor is turned off when using

light to medium weight fabrics.

Press

When the following message appears, press

→ The embroidery frame moves so the fabric can be

scanned.

Memo

• If you do not wish the upper thread to be scanned

together with the fabric, scan the fabric without the

needle threaded with the upper thread.