- ページ 27

タブレット Fujitsu Point 1600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Point 1600 48 ページ。 Pen tablet
Fujitsu Point 1600 にも：製品リファレンス (2 ページ)

2. Slide the battery latch on the battery pack currently installed in the pen tablet to

the open position as shown in Figure 2-2.

3. Slide the battery pack out of the pen tablet.

You can now install a charged battery pack in the pen tablet and charge the battery

pack that you removed in an external battery charger if one is available. See the

instructions that came with your external battery charger for details.

4. To install a battery pack in the pen tablet, slide the latch on the battery pack to the

open position.

5. Slide the battery pack into the pen tablet until it fits snugly. Slide the latch to the

closed position to latch the battery pack in place.

You can now start or resume the system and use the pen tablet.

Conserving Battery Power

A fully charged battery pack can power the Point 1600 pen tablet for about 4 hours

under typical use (with power management). Your results may vary depending on

how the pen tablet is configured. You can extend the life of your battery pack by

conserving battery power.

Figure 2-2 Removing the Battery Pack

Battery Pack

Slide battery pack

out to remove.

Battery Latch

Conserving Battery Power

Slide latch to open.

2-13