- ページ 3

タブレット Fujitsu Stylistic 3400のPDF 組立および使用説明書をオンラインで閲覧またはダウンロードできます。Fujitsu Stylistic 3400 4 ページ。 Wall-mount cradle
Fujitsu Stylistic 3400 にも：ユーザーマニュアル (3 ページ), インストレーション・マニュアル (4 ページ), ユーザーマニュアル (2 ページ), 操作説明 (1 ページ), インストールとユーザーマニュアル (8 ページ), インストレーション・マニュアル (1 ページ)

ページを印刷する

AC Power

Plug

Cutaway

Figure 5. AC Adapter Location

16. Route the AC power cord around the adapter,

as shown in Figure 5. Plug the AC power plug

into the circuit card, and bundle the excess

cable above the adapter.

Final Assembly

17. Carefully position the back assembly inside

the tray assembly so that the six holes in each

are aligned (reference Figures 3 and 6). Use

care when joining the two assemblies; ensure

that no wires or cables are crimped between

the two parts.

Hanger holes

Assembly Screws

Figure 6. Rear of Wall Mount Assembly

4/00

AC Power Cord

DC Power

AC Adapter

Cord

Latch

Cradle

Lock

Figure 7. Assembled Wall Mount

18. Using a 3/32 Allen wrench, install the six

short screws from the hardware kit. The

assembled wall mount is illustrated in Fig. 7.

19. After the wall mount cradle is assembled, it

should be mounted to a secure location and

wired to a convenient outlet in accordance

with the user's needs. Typically, the four

hanger holes on the back of the cradle are used

to mount the cradle.

Using the Wall Mount Cradle

The contact pins in the wall mount cradle provide

DC Input and USB interfaces to the pen tablet. The

USB pins are used by the USB keyboard.

Avoid bringing your system in direct contact with the

magnetic latches. Magnetic fields can have an

adverse affect on electronic media, and data on your

hard drive could be damaged or destroyed.

Page 3 of 4

Front

Brackets

Tray

Caution

58-0710-00A