ページを印刷する
This washing machine has a 0–24 hour preset function, which you can set to determine
the time when the washing program will finish. (It is, in effect, similar to a 'delayed start'
function, but you set the time period after which you want the wash to finish rather than
to start.)
NOTES: * The Preset function is not available for the Delicate program.
* To avoid water leakage when using this function, make sure the water taps
are open, the drain hose is properly installed and the washing load and
detergent are properly prepared.
1. Put your washing in the machine, loading items uniformly in the tub.
2. Press the Power button.
3. Select the required Program and process, and any other Water Level, Temperature
and Ultrasonic, if required.
4. Press the Preset button to select the desired time period (in hours) for the wash to
finish.
5. Select the water level, if necessary.
6. Add any detergents (see below and page 14 for details).
7. Close the washer lid and press the Start/Pause button.
8. After setting the Preset, the corresponding light will illuminate and all other lights will
be switched off about one minute later. (If you set the child lock, the Child Lock light
will be on.)
9. To check the preset program, press any button (except for the Power button); the
program will be indicated for 5 seconds. During these 5 seconds you can press the
Water Level button and set the water level.
10. To cancel the preset, shut off the power.
11. To change the preset time, first cancel the preset, then set it again.
When using the delayed wash, we recommend
you use powder detergent. Do not add detergent
directly to the wash tub ahead of the wash time,
but follow the instructions below:
• Washing detergent: either put detergent into
the detergent box or, if you prefer to put it
directly into the wash tub, wrap the powder in a
small cloth.
• Fabric softener: dilute the softener with twice
the amount of water, then pour the solution into the softener dispenser.
17