ページを印刷する
Fuzzy control
For certain wash programs, the machine automatically detects the weight of your
wash load and selects the appropriate wash cycle processes.
• For the Normal and Heavy Duty programs, the machine will automatically select
the correct water power and level, wash and spin time, and rinse type.
• For the Custom and Wool programs, the machine will automatically select the
correct water level. Other wash cycle processes have to be manually set.
Ultrasonic function
This top load washing machine is equipped with an ultrasonic pump, which generates
vibrations into the wash tub. These vibrations help remove stains and dirt reducing the
required detergent amount and wash time.
To select this feature, press and hold the Preset/Ultrasonic button for four seconds
until the corresponding light comes on and a buzzer sounds. Repeat the steps to
cancel. When selecting the Ultrasonic wash, it is recommended to use less detergent
than usual.
Memory function
When you run the Normal, Custom or Heavy Duty program, the machine memorises
your settings (except for preset time and water level) for the next time you select it.
NOTE: This function is not available for the Wool, Blanket and Delicate programs.
Child lock
With the child lock activated, the machine will stop working automatically and sound
an alarm if the washer lid is opened for 4 seconds. To set the child lock:
• Press the Power button to switch on the power, then press and hold the Program
button for 4 seconds until a buzzer sounds. The child lock will be activated when
the Start/Pause button is pressed. Repeat the steps to cancel.
Start of washing
Washing will start when the water inside the tub has reached two levels below the set
level while the water will continue to flow in (see page 14 for the eight water levels).
This early start of washing will optimise the wash time and allow the detergent to
dissolve fully before the start of the set wash time. This function will be ineffective:
• When water level 1 (28L) or 2 (35L) is selected.
• When the Delicate or Blanket program is selected.
• When Soak is selected, after the soaking process.
19