- ページ 15

調理器 Indesit KN6E61A/FRのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit KN6E61A/FR 28 ページ。 Cooker and oven

ページを印刷する

Using the electric hob

Rotisserie*

with the SELECTOR knob.

Using the "end-cooking" timer*

1. To set the buzzer, turn the COOKING TIMER knob

clockwise almost one complete revolution.

2. Turn the knob anticlockwise to set the desired time:

align the minutes shown on the COOKING TIMER knob

with the indicator on the control panel.

3. When the selected time has elapsed, a buzzer

sounds and the oven turns off.

4. When the oven is off the cooking timer can be used

as a normal timer.

! To use the oven manually, in other words when you

do not wish to use the end of cooking timer, turn the

COOKING TIMER knob until it reaches the  symbol.

Setting

Normal or Fast Plate

Off

Cooking vegetables, fish

Cooking potatoes (using steam) soups,

chickpeas, beans.

Continuing the cooking of large quantities

of food, minestrone

For roasting (average)

For roasting (above average)

For browning and reaching a boil in a

short time.

* Only available in certain models.

To operate the rotisserie

(see diagram) proceed as

follows:

1. Place the dripping

pan in position 1.

2. Place the rotisserie

support in position 4 and

insert the spit in the hole

provided on the back

panel of the oven.

3. Activate the rotisserie

by selecting

! The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the first few hours

of use there may be a smell of rubber which will

disappear very quickly.

Switching the cooking zones on and off

To switch on a cooking zone, turn the corresponding

knob in a clockwise direction.

To switch it off again, turn the knob in an anticlockwise

direction until it is in the "0" position.

If the ELECTRIC HOTPLATE ON indicator light is lit, this

shows that at least one hotplate on the hob is switched

on.

Practical advice on using the hob

• Use pans with a thick, flat base to ensure that they

adhere perfectly to the cooking zone.

• Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use all

the heat produced.

• Always make sure that the base of the pan is

completely clean and dry: this ensures that the pans

adhere perfectly to the cooking zones and that both

the pans and the hob last for a longer period of time.

• Avoid using the same cookware that is used on gas

burners: the heat concentration on gas burners may

have warped the base of the pan, causing it not to

adhere to the surface correctly.

• Never leave a cooking zone switched on without a

pan on top of it, as doing so may cause the zone to

become damaged.