- ページ 12

換気フード AEG 2600 DのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。AEG 2600 D 16 ページ。
AEG 2600 D にも：操作およびインストール手順 (20 ページ)

Installation

Unpacking

Check that the cooker hood is not damaged. Transportation damages

should immediately be reported to the transport company. Damages, faults

and missing parts should immediately be reported to the retailer.

Dispose carefully of the packaging material so that it is out of the way of

small children.

Position

The cooker hood should be mounted freely hanging on the wall. The

cooker

hood must be at least 50 cm above electric hobs or electric ranges, or at

least 65 cm above gas burners or gas ranges.

The cooker hood cannot be connected to flues of other

appliances that run on energy sources other than electricity.

Please, keep to the provisions of official directives regarding fume

discharge.

Electrical connection

The electric outlet should be placed inside the chimney.The hood has a

power cable, 100 cm, with earth connection and the rated voltage is

220 - 240 V.

Connect the hood to the mains supply via a double pole switch

which has 3 mm minimum clearance between the contacts 220-240 V.

The following is valid in the United Kingdom only:

As the colours of the wires in the mains lead of this appliance may not

correspond with the coloured markings identifying the terminals in your plug,

proceed as follows:

- the wire which is coloured green and yellow must be connected to the

terminal in the plug which is marked with the letter E or by the earth

symbol (

), or coloured green or green and yellow;

- the wire which is coloured blue must be connected to the terminal which

is marked with the letter N or coloured black, -

- the wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.