- ページ 14

換気フード AEG 2600 DのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。AEG 2600 D 20 ページ。
AEG 2600 D にも：操作および設置マニュアル (16 ページ)

Electrical connection

Before connecting the appliance to the power supply, check that the

voltage indicated on the rating plate corresponds to the mains power

supply available. Appliances fitted with a plug can be connected to any

standard power socket within easy access.

Should it be necessary to provide a fixed connection, the hood must

only be installed by an electrician authorised by the local electricity

board. To isolate the cooker hood from the mains, pull the mains plug.

If the appliance is permanently connected to the mains, then it must be

isolated from the mains using measures provided in the electrical

installation (fuses -unscrew-type fuses, cut-out, current trips or similar

that have a contact separation of >3mm when open).

The manufacture declines all responsibility for malfunctions resulting

from failure to comply with the above instructions.

If the power socket is applied directly above the hood this gives two

advantages:

1. The socket is not visible.

2. The appliance can be disconnected at need merely be removing the

plug.

Electrical connection

220-240 V – by means of fixed power cable with plug.

(Fixed connection of the appliance must only be carried out by an

authorised electrician.)