AEG 2600 D Operating And Installation Instructions - Page 14
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood AEG 2600 D. AEG 2600 D 20 pages.
Also for AEG 2600 D: Operating And Installation Manual (16 pages)
Print Page
Electrical connection
Safety warnings for the electrician
Before connecting the appliance to the power supply, check that the
voltage indicated on the rating plate corresponds to the mains power
supply available. Appliances fitted with a plug can be connected to any
standard power socket within easy access.
Should it be necessary to provide a fixed connection, the hood must
only be installed by an electrician authorised by the local electricity
board. To isolate the cooker hood from the mains, pull the mains plug.
If the appliance is permanently connected to the mains, then it must be
isolated from the mains using measures provided in the electrical
installation (fuses -unscrew-type fuses, cut-out, current trips or similar
that have a contact separation of >3mm when open).
The manufacture declines all responsibility for malfunctions resulting
from failure to comply with the above instructions.
If the power socket is applied directly above the hood this gives two
advantages:
1. The socket is not visible.
2. The appliance can be disconnected at need merely be removing the
plug.
Electrical connection
220-240 V – by means of fixed power cable with plug.
(Fixed connection of the appliance must only be carried out by an
authorised electrician.)
14