- ページ 5
換気フード AEG 8359 DのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。AEG 8359 D 18 ページ。 Fume extractor hood
Electrical connections
Safety warnings for electrician
It must be ensured that the voltage and current indicated on the rating
plate agree with the voltage of the user to electricity supply.
If the appliance has been equipped with a mains lead with a moulded-on
type plug, the following regulations must be comply with:
The plug moulded on to the lead incorporates a fuse. For replacement,
use a 5 amp BS1362 fuse. Only ASTA approved or certified fuses should
be used. If the fuse cover/carrier is lost, a replacement cover/carrie must
be obtained from an electrical goods retailer. If the socket outlets are not
suitable for the plug fitted to the appliance, then the plug must be cut off
and destroyed for safety reasons, and an appropriate plug be fitted.
When wiring the plug ensure that all strands of wire are securely retained
in each terminal. Do not forget to tighten the mains lead clamp on the plug.
Electrical connections
230 V - using fixed power supply line with plug.
Fuse rating
(The unit should only be connected up by an authorized electrician).
See rating plate for further information.
It is recommended that the socket for the plug is sited above the cooker
hood or above the overhead cabinet.
This has 2 advantages:
1) The socket is not visible.
2) The appliance can easily be unplugged when necessary.
If a fixed connection is required the cooker hood should be connected by
an electrical installer registered with a competent electricity company. An
isolating device is to be provided on the fixed wiring side. Switches with
a contact opening of more than 3mm apply as isolating devices.
These include-automatic cut-out switches, fuses and contactors (VDE
0730, s. 7, Part1).
13 amps
21