- ページ 7

換気フード AEG 9600 DのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。AEG 9600 D 16 ページ。 Cooker hood

LED Indicator lights for verifying the saturation

of filters

This hood is supplied without a charcoal filter. If the hood is to be used

in the recirculation mode with a charcoal filter, the saturation indicator

must be activated as follows:

Depress and hold the A and B buttons simultaneously for 3 seconds.

Initially only the LED indicator signal for the grease filter C is activated,

shortly after the LED indicator for the charcoal filter D will activate, at

this point the saturation detection has been enabled.

To switch off the saturation detection : depress and hold the A and B

buttons for 3 seconds until the LED indicator for the active carbon filter

is flashing.

Led – Indicator for grease filter C

The LED indicator for the grease filter will flash when it requires

cleaning.

Follow the maintenance instructions.

The LED indicator for the charcoal filter illuminates when the filter

requires replacing.

This occurs after about 160 working hours from when the active carbon

filter was first put into operation.

After cleaning or replacing the filter depress and hold the G and H

buttons again for 3 seconds until the grease filter LED or the charcoal

indicator LED are no longer flashing.