AEG 9600 D Manual de operação e instalação - Página 7

Procurar online ou descarregar pdf Manual de operação e instalação para Campânula de ventilação AEG 9600 D. AEG 9600 D 16 páginas. Cooker hood

LED Indicator lights for verifying the saturation

of filters

This hood is supplied without a charcoal filter. If the hood is to be used

in the recirculation mode with a charcoal filter, the saturation indicator

must be activated as follows:

Depress and hold the A and B buttons simultaneously for 3 seconds.

Initially only the LED indicator signal for the grease filter C is activated,

shortly after the LED indicator for the charcoal filter D will activate, at

this point the saturation detection has been enabled.

To switch off the saturation detection : depress and hold the A and B

buttons for 3 seconds until the LED indicator for the active carbon filter

is flashing.

Led – Indicator for grease filter C

The LED indicator for the grease filter will flash when it requires

cleaning.

Follow the maintenance instructions.

The LED indicator for the charcoal filter illuminates when the filter

requires replacing.

This occurs after about 160 working hours from when the active carbon

filter was first put into operation.

After cleaning or replacing the filter depress and hold the G and H

buttons again for 3 seconds until the grease filter LED or the charcoal

indicator LED are no longer flashing.