- ページ 6
カメラアクセサリー Acadalus CPS-h1のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Acadalus CPS-h1 7 ページ。 Self-leveling camera head
ページを印刷するTROUBLESHOOTING
Problem:
The Control Panel keeps on flashing in a
circular motion for more than 20 sec.
Solution:
The system's microprocessors are not
synchronized; Make sure the camera is
pointed away from the control panel. Turn
the system off by pushing the On/Off but-
ton until the lights go off. Turn the system
back on again.
Problem:
The head cannot move, even though the
motors struggle for a while.
Solution:
Loosen the locking knob.
Problem:
The head only turns on the fans and re-
fuses to move.
Solution:
The system has temporarily shut down
to protect the electronics and the motors
from overheating. After it has cooled down
to a safe operating temperature, it will
work properly again.
10
Problem:
Upon startup the system refuses to work
and only one LED of the control panel is lit.
Solution:
One or more of the internal microproces-
sors controlling the head could not be de-
tected. If the problem persists, please send
the device in for service; one of the internal
cables or boards has become faulty.
REPAIRS
Your Acadalus CPS-h1 comes with a war-
ranty of 36 months from date of purchase.
Before returning the product to the factory
or an authorized service center for repair,
please contact us to obtain an RMA num-
ber and shipping instructions.
Visit http://www.acadalus.com and click on
Support to obtain your RMA number. Also
be sure to register your CPS-h1 for trouble-
free support and to stay up to date on
updates and notifications.
11