Acadalus CPS-h1 Kullanıcı El Kitabı - Sayfa 6

Kamera Aksesuarları Acadalus CPS-h1 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Acadalus CPS-h1 7 sayfaları. Self-leveling camera head

Sayfayı Yazdır

TROUBLESHOOTING

Problem:

The Control Panel keeps on flashing in a

circular motion for more than 20 sec.

Solution:

The system's microprocessors are not

synchronized; Make sure the camera is

pointed away from the control panel. Turn

the system off by pushing the On/Off but-

ton until the lights go off. Turn the system

back on again.

Problem:

The head cannot move, even though the

motors struggle for a while.

Solution:

Loosen the locking knob.

Problem:

The head only turns on the fans and re-

fuses to move.

Solution:

The system has temporarily shut down

to protect the electronics and the motors

from overheating. After it has cooled down

to a safe operating temperature, it will

work properly again.

Problem:

Upon startup the system refuses to work

and only one LED of the control panel is lit.

Solution:

One or more of the internal microproces-

sors controlling the head could not be de-

tected. If the problem persists, please send

the device in for service; one of the internal

cables or boards has become faulty.

REPAIRS

Your Acadalus CPS-h1 comes with a war-

ranty of 36 months from date of purchase.

Before returning the product to the factory

or an authorized service center for repair,

please contact us to obtain an RMA num-

ber and shipping instructions.

Visit http://www.acadalus.com and click on

Support to obtain your RMA number. Also

be sure to register your CPS-h1 for trouble-

free support and to stay up to date on

updates and notifications.