- ページ 17

バスルーム設備 Kohler BELAY K-156T-LCPのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler BELAY K-156T-LCP 23 ページ。

Fill the bath at least 2" (51 mm) above the highest

whirlpool jets.

Press the air switch actuator to turn the whirlpool on.

The in-line heater will turn on automatically.

Press the air switch actuator a second time to turn

the whirlpool and in-line heater off.

When you are done bathing, open the drain and

remain seated while the water drains from the bath.

When the water has drained from the bath, unlatch

and open the door.

Carefully exit the bath.

Adjust Air/Water Mix

Adjust each jet for optimum air/water mixture. Turn

the jet trim clockwise to reduce air flow, or

counterclockwise to increase air flow.

Flush the Whirlpool System

NOTE: Flush the whirlpool system twice a month or

more, depending on usage.

Turn the jet trim rings fully clockwise to block air

induction.

Fill the bath with warm water at least 2" (51 mm)

above the highest jets, or leave water in the bath

after use.

Add 2 teaspoons (10 ml) of a low-foaming, powder

automatic dishwasher detergent and 20 ounces

(590 ml) of household bleach (5% - 6% sodium

hypochlorite) to the water.

Run the whirlpool for 5 to 10 minutes. Turn off the

whirlpool and drain.

Rinse the surfaces of the bath, jets, faucet,

handrails, and drain. Wipe dry with a soft cloth.

1397340-T01-A

Fill with water at least 2" (51 mm) above the highest jet.

Turn the jet trim ring clockwise

to decrease the flow.

Turn the jet trim ring counterclockwise to increase the flow.

-17-

10 ml

590 ml

5-10

51 mm

Position the jet nozzles to

direct the water flow as desired.

2" 51 mm

5% - 6%