- ページ 9

バスルーム設備 Kohler BodySpa K-1000のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler BodySpa K-1000 28 ページ。 Tower custom hydro-massage system
Kohler BodySpa K-1000 にも：ホームオーナーズマニュアル (48 ページ)

ページを印刷する

D. CONNECT VARIABLE FLOW VALVE

ASSEMBLY TO PUMP

Loosen the variable flow valve assembly by unthreading

the union nut. Reposition the variable flow valve assembly

so the outlet union lines up with the mounting frame union

nut. Securely handtighten the union nut. Be sure the union

O-ring is in place. Do not apply sealant to the union.

Handtighten the mounting frame union nut to the variable

flow valve union. Be sure the union O-ring is in place. Do

not apply sealant to the union.

7. ELECTRICAL CONNECTIONS

WARNING: Risk of electrical shock. To reduce

the risk of electric shock, connect only to a properly

grounded, grounding-type receptacle, protected

by a Ground-Fault Circuit-Interrupter (GFCI). Do

not remove the plug's grounding pin. Do not use a

grounding adapter.

The Kohler BodySpa is equipped with a cord and plug.

All wiring of the pump and control has been completed

at the factory. A licensed electrician must install a

GFCI-protected, 120 V, 20 A, grounded outlet. The

BodySpa may then be plugged into this outlet. No other

load should be on this circuit. Locate the outlet behind

the BodySpa, and within 24" of the pump.

* For bonding in accordance with national and local

codes.

8. INSPECT CONNECTIONS

Check all electrical connections.

Open the hot and cold water valves, and check all supply

connections for leaks. Fill the footbath to the overflow,

and check the overflow and drain connections for leaks.

Kohler Co., Kohler WI U.S.A.

Mounting

Frame

Variable Flow

Valve Assembly

Pump

Bonding

(Earthing)

Lug*

Mounting

Frame

Union Nut

BACK VIEW

20 A

Plug-in

Receptacle

Cord

Pump

Control Box

116290-2-