- ページ 2

バスルーム設備 Kohler C3-050のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler C3-050 2 ページ。 Elongated bidet toilet seat
Kohler C3-050 にも：インストレーション・マニュアル (25 ページ), ホームオーナーズマニュアル (35 ページ), インストレーション・マニュアル (13 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), マニュアル (2 ページ)

18-5/8"

Required Electrical Service

One dedicated circuit required, protected with Class A

Ground-Fault Circuit-Interrupter (GFCI). Outside North America,

this device may be known as a Residual Current Device (RCD).

120 V, 15 A, 60 Hz

Technical Information

All product dimensions are nominal.

Seat shape type:

Elongated

Seat front type:

Closed-front

Seat-mounting holes:

5-1/2" (140 mm)

Power cord length:

43" (1092 mm)

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

5-25-2019 06:26 - US/CA

Elongated Cleansing Toilet Seat

Notes

Install this product according to the installation

guide.

Connect the seat to a cold water supply of

drinking quality water at a pressure of 20 psi - 80

psi (139 kPa - 551 kPa).

Do not install this seat in a location where: (1)

water might be splashed on the product or (2)

excessive moisture, high humidity levels, or

condensation is present. This will avoid damage

to the electronic components.

Do not use an extension cord with this product.

To avoid possible product malfunction, do not

plug in the seat until instructed to do so.

Locate the recepticle at least 6" (152 mm) above

the floor, and within a 32" (813 mm) radius

measured 2" (51 mm) from the bowl ledge.

C3 -050

K-18751