Kohler C3-050 Hızlı Başlangıç Kılavuzu - Sayfa 2
Banyo Armatürleri Kohler C3-050 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Kohler C3-050 2 sayfaları. Elongated bidet toilet seat
Ayrıca Kohler C3-050 için: Kurulum Kılavuzu (25 sayfalar), Ev Sahibi El Kitabı (35 sayfalar), Kurulum Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (2 sayfalar)
![Kohler C3-050 Hızlı Başlangıç Kılavuzu](/uploads/products/server2/2591787/2591787.png)
18-5/8"
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Seat shape type:
Elongated
Seat front type:
Closed-front
Seat-mounting holes:
5-1/2" (140 mm)
Power cord length:
43" (1092 mm)
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-25-2019 06:26 - US/CA
Elongated Cleansing Toilet Seat
Notes
Install this product according to the installation
guide.
Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi - 80
psi (139 kPa - 551 kPa).
Do not install this seat in a location where: (1)
water might be splashed on the product or (2)
excessive moisture, high humidity levels, or
condensation is present. This will avoid damage
to the electronic components.
Do not use an extension cord with this product.
To avoid possible product malfunction, do not
plug in the seat until instructed to do so.
Locate the recepticle at least 6" (152 mm) above
the floor, and within a 32" (813 mm) radius
measured 2" (51 mm) from the bowl ledge.
C3 -050
K-18751