- ページ 3

バスルーム設備 Kohler K-11831のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler K-11831 28 ページ。 Wall-mount lavatory faucet valve
Kohler K-11831 にも：ホームオーナーズマニュアル (21 ページ)

ページを印刷する

7/8" (2.2 cm) Min

1-7/8" (4.8 cm) Max

1-5/8"

(4.1 cm)

Finished Wall

1-3/8"

(3.5 cm)

1-7/16" (3.7 cm) Min

2-7/16" (6.2 cm) Max

2-3/4" (7 cm) for Standard

Installations

4-1/4" (10.8 cm) for

Installations with Stainless

Steel Vessel Lavatories

1. Prepare the Site

NOTE: The wall plate requires special framing and support

considerations. Pay special attention to minimum and maximum

faucet height recommendations noted in the roughing-in sheet.

Refer to the roughing-in dimensions for additional mounting

information.

A suggested framing example is shown. Each installation may

have different framing requirements than those shown.

Mount the control box on the wall below the lavatory or

countertop.

Construct the framing for your installation.

2. Attach the Wall Plate

NOTE: Make sure the location of the wall plate is correct before

securing it in place. The centerline of the drain and faucet should be

in line with each other.

Secure the wall plate to the studs using six wood screws (not

provided).

Kohler Co.

Six Round Holes (Typical)

Wall Plate

16"

(40.6 cm)

Screws

7" (17.8 cm)

2x4 Stud Framing

Vessel Height

1080064-2-A