- ページ 9

バスタブ Kohler K-1114PのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler K-1114P 48 ページ。 Bath with airjets and integral apron canada
Kohler K-1114P にも：インストレーション・マニュアル (48 ページ)

ページを印刷する

Secure the Unit (cont.)

Option Using Silicone Sealant

With help, carefully lift the bath into position.

Insert the drain tailpiece into the trap. Make sure the bath is level and resting on all support blocks.

Remove the protective tape from the rim. Apply a continuous bead of high-quality silicone sealant

around the entire rim of the bath.

Allow the sealant to cure according to the manufacturer's instructions.

5. Install the Plumbing

WARNING: Risk of property damage. Ensure a watertight seal on the bath drain.

Connect the drain to the trap according to the drain manufacturer's instructions.

NOTICE: An access panel will simplify future maintenance.

Install the faucet valving according to the faucet manufacturer's instructions. Do not install the

faucet trim until instructed. Open the hot and cold water supplies, and check the supply

connections for leakage.

Run water into the bath, and check the drain connections for leakage.

Kohler Co.

1034593-2-F