- ページ 2

バスタブ Kohler K-11344のPDF インストレーション＆ケア・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler K-11344 28 ページ。 Freestanding bath
Kohler K-11344 にも：インストレーション＆ケア・マニュアル (45 ページ), インストレーション・マニュアル (25 ページ), ラフイン・マニュアル (4 ページ)

Tools and Materials

Sealant

IMPORTANT! To ensure a successful installation, install the bath on a level ﬁnished ﬂoor.

IMPORTANT! This product requires a K-7219 drain for proper installation.

Observe all local plumbing and building codes.

Unpack and inspect the bath for damage. Return the bath to the carton until installation.

Make sure all plumbing connections around the bath are easily accessible for future maintenance.

We strongly recommend that this installation be performed by a professional plumber or contractor.

Provide access for making the ﬁnal drain connection from below.

A minimum of two people are needed to perform this installation.

This bath is designed for a freestanding installation only.

Select fasteners and a drilling method based on the type of ﬂoor the bath will be attached to.

This bath conforms to CSA B45.5/IAPMO Z124. All dimensions are nominal.

NOTICE: Provide adequate ﬂoor support.

NOTICE: Measure your product for site preparation. Note the model number located on the back of the

bath, then visit the product page at www.kohler.com for more information.

Ensure the subﬂoor is level.

Determine the location of the bath. Provide a minimum clearance of 24" (610 mm) around the

perimeter of the bath. Additional space is recommended to ease installation.

Use the cut-out template provided with the bath to properly mark the water supply and drain

locations in relation to the chosen location of the bath.

Cut the marked water supply and drain locations on the subﬂoor with a saw and hole saw.

Install the ﬁnished ﬂooring material prior to installing the bath.

Ensure the ﬁnished ﬂoor is level before proceeding with the bath installation.

1207307-2-B

Plus:

• Conventional tools and materials

• Drop cloth

• Fasteners (as necessary)

• Rags

• Saw horses

• Hole saw

Kohler Co.