- ページ 6

バスタブ Kohler VINTAGE K-700のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler VINTAGE K-700 21 ページ。 Roughing-in guide
Kohler VINTAGE K-700 にも：取付説明書 (9 ページ), ラフイン・マニュアル (4 ページ), インストレーション＆ケア・マニュアル (25 ページ), マニュアル (4 ページ)

Finished

Deck

Material

Bath

7. Complete the Installation

For Drop-In Installations

Cover the framing with water-resistant wall material. Seal the joints between the bath rim edges and

the water-resistant wall material with silicone sealant.

Tape and mud the water-resistant wall material.

Install the ﬁnished wall. Seal the joints between the bath rim and the ﬁnished wall with silicone

sealant.

Clean-Up

When cleaning up after installation, do not use abrasive cleaners, as they may scratch and dull the bath

surface. Use warm water and a liquid, non-abrasive detergent to clean the surface.

CAUTION: Do not allow cleaners containing petroleum distillates to remain in contact with the surface

for long periods of time.

Remove stubborn stains, paint, or tar with turpentine or paint thinner.

Remove plaster by scraping with a wood edge. Do not use metal scrapers, wire brushes, or other metal tools.

You can use a powder-type detergent on a damp cloth to provide mild abrasive action to any residual

plaster.

1023725-2-A

Apply silicone

sealant to the edges

of the water-resistant

deck material and

the finished deck

Water-Resistant

Deck Material

Framing

Kohler Co.