Kohler VINTAGE K-700 설치 매뉴얼 - 페이지 6

{카테고리_이름} Kohler VINTAGE K-700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler VINTAGE K-700 21 페이지. Roughing-in guide
Kohler VINTAGE K-700에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (9 페이지), 러프인 매뉴얼 (4 페이지), 설치 및 관리 매뉴얼 (25 페이지), 매뉴얼 (4 페이지)

페이지 인쇄

Finished

Deck

Material

Bath

7. Complete the Installation

For Drop-In Installations

Cover the framing with water-resistant wall material. Seal the joints between the bath rim edges and

the water-resistant wall material with silicone sealant.

Tape and mud the water-resistant wall material.

Install the ﬁnished wall. Seal the joints between the bath rim and the ﬁnished wall with silicone

sealant.

Clean-Up

When cleaning up after installation, do not use abrasive cleaners, as they may scratch and dull the bath

surface. Use warm water and a liquid, non-abrasive detergent to clean the surface.

CAUTION: Do not allow cleaners containing petroleum distillates to remain in contact with the surface

for long periods of time.

Remove stubborn stains, paint, or tar with turpentine or paint thinner.

Remove plaster by scraping with a wood edge. Do not use metal scrapers, wire brushes, or other metal tools.

You can use a powder-type detergent on a damp cloth to provide mild abrasive action to any residual

plaster.

1023725-2-A

Apply silicone

sealant to the edges

of the water-resistant

deck material and

the finished deck

Water-Resistant

Deck Material

Framing

Kohler Co.