- ページ 11

トイレ Kohler Escale K-25091T-SのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler Escale K-25091T-S 11 ページ。 Floor standing toilet
Kohler Escale K-25091T-S にも：取付説明書 (23 ページ), 取付説明書 (28 ページ), 取付説明書 (30 ページ)

ページを印刷する

7. Fix faceplate

Put the faceplate onto the bottom board.

Pull the faceplate downwards.

Tighten the rod with L wrench.

Note:

When removing the faceplate, unscrew the screw 3mm

out and push the faceplate 3.5mm upwards to remove it.

8. Maintenance

Test run and check the valve after installation. Leakage at

inlet connector:

Refer to Fig.7 to check whether the seal is properly

installed, nut is tightened and whether the inlet pipe is at

proper vertical and horizontal level.

Leakage at outlet connector: Check whether the surface is

smooth, the seal is twisted and the nut is tightened.

Water cannot be stopped: Press the rod to check whether

it can be restored, there is wastes inside and valve

assembly is blocked.

1299535-T01-C

Snap

Pull

Lock

Fig.9

-5-

;

3.5mm

Faceplate Assembly

Button Assembly

Top Screw

Wrench

3mm