Kohler Escale K-25091T-S 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Kohler Escale K-25091T-S에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Escale K-25091T-S 11 페이지. Floor standing toilet
Kohler Escale K-25091T-S에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (23 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (30 페이지)

페이지 인쇄

7. Fix faceplate

Put the faceplate onto the bottom board.

Pull the faceplate downwards.

Tighten the rod with L wrench.

Note:

When removing the faceplate, unscrew the screw 3mm

out and push the faceplate 3.5mm upwards to remove it.

8. Maintenance

Test run and check the valve after installation. Leakage at

inlet connector:

Refer to Fig.7 to check whether the seal is properly

installed, nut is tightened and whether the inlet pipe is at

proper vertical and horizontal level.

Leakage at outlet connector: Check whether the surface is

smooth, the seal is twisted and the nut is tightened.

Water cannot be stopped: Press the rod to check whether

it can be restored, there is wastes inside and valve

assembly is blocked.

1299535-T01-C

Snap

Pull

Lock

Fig.9

-5-

;

3.5mm

Faceplate Assembly

Button Assembly

Top Screw

Wrench

3mm