- ページ 12
金属探知機 AAVIX AGT310のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AAVIX AGT310 17 ページ。 2x9v smart metal detector
ページを印刷するOUTDOOR TESTING AND USE
1. Rotate the VOLUME switch clockwise away from OFF to
power on the detector.
2. Follow the steps of 2 described in section of Indoor Testing
and Use to set the operating mode.
3. Find an area on the ground outside where there is no metal.
4. Place a sample of the material you want the detector to find
(such as a gold ring or a coin) on the ground.
Note:
If you are using valuable metal such as gold to test the detector,
mark the area where you place the item, to help you find it later.
Do not place it in tall grass or weeds).
5. Hold the search coil level to the ground about 1~2 inches
above the surface, slowly move the search coil over the area
where you placed the sample, sweeping the search coil in a
side-to-side motion.
Search coil Sweeping Hints:
Never sweep the search coil as if it were a pendulum.
Raising the search coil while sweeping or at the end of a
sweep will cause false readings.
Sweep slowly, hurrying will cause you to miss targets.
It's better you sweep the search coil from side to side in an
arc line of 3 inches motion and keep the search coil parallel
12