AAVIX AGT310 소유자 매뉴얼 - 페이지 12
{카테고리_이름} AAVIX AGT310에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AAVIX AGT310 17 페이지. 2x9v smart metal detector
페이지 인쇄OUTDOOR TESTING AND USE
1. Rotate the VOLUME switch clockwise away from OFF to
power on the detector.
2. Follow the steps of 2 described in section of Indoor Testing
and Use to set the operating mode.
3. Find an area on the ground outside where there is no metal.
4. Place a sample of the material you want the detector to find
(such as a gold ring or a coin) on the ground.
Note:
If you are using valuable metal such as gold to test the detector,
mark the area where you place the item, to help you find it later.
Do not place it in tall grass or weeds).
5. Hold the search coil level to the ground about 1~2 inches
above the surface, slowly move the search coil over the area
where you placed the sample, sweeping the search coil in a
side-to-side motion.
Search coil Sweeping Hints:
Never sweep the search coil as if it were a pendulum.
Raising the search coil while sweeping or at the end of a
sweep will cause false readings.
Sweep slowly, hurrying will cause you to miss targets.
It's better you sweep the search coil from side to side in an
arc line of 3 inches motion and keep the search coil parallel
12