- ページ 7

金属探知機 AAVIX AGT310のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AAVIX AGT310 17 ページ。 2x9v smart metal detector

DISC Numeric Indicator

4. CONTROL BUTTONS

SENS:

Press SENS then + or – to increase or decrease the sensitivity.

LCD will display the current setting of sensitivity. If the target

depth is beyond the max. sensitivity of the detector, the

target will not be found.

DISC numeric range(0-80):

Press DISC then + or – to select the desired DISC number. If

the target material is beyond the DISC range, it can't be

discriminated.

Note: The highest DISC numeric setting is 80. If you set the

DISC number to 80, all targets less than this number will

not be detected.

NOTCH:

Press NOTCH, then + or – to select the target to be notched.

The cursor above the selected target will ﬂash. Press NOTCH

again, the target name below the cursor will disappear.

Rotate the VOLUME switch clockwise away from OFF to power

on the detector. LCD will display all symbols .Meanwhile the

Low BATT Indicator

Target Indicator

DISC / NOTCH

Indicator

SENS/DEPTH

Indicator

Target Numeric Indicator