AAVIX AGT310 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Metal Detector AAVIX AGT310. AAVIX AGT310 17 pages. 2x9v smart metal detector

Print Page
DISC Numeric Indicator

4. CONTROL BUTTONS

SENS:
Press SENS then + or – to increase or decrease the sensitivity.
LCD will display the current setting of sensitivity. If the target
depth is beyond the max. sensitivity of the detector, the
target will not be found.
DISC numeric range(0-80):
Press DISC then + or – to select the desired DISC number. If
the target material is beyond the DISC range, it can't be
discriminated.
Note: The highest DISC numeric setting is 80. If you set the
DISC number to 80, all targets less than this number will
not be detected.
NOTCH:
Press NOTCH, then + or – to select the target to be notched.
The cursor above the selected target will flash. Press NOTCH
again, the target name below the cursor will disappear.

OPERATION

1. TURNING ON THE DETECTOR

Rotate the VOLUME switch clockwise away from OFF to power
on the detector. LCD will display all symbols .Meanwhile the
Low BATT Indicator
7
Target Indicator
DISC / NOTCH
Indicator
SENS/DEPTH
Indicator
Target Numeric Indicator