- ページ 10

芝生とガーデン用品 Aqua Control SELECT Series 2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua Control SELECT Series 2 19 ページ。 Display aerator

ページを印刷する

1. Tie the mooring line to the eyebolts on the float.

2. Pull the unit past its final location by a distance at least equal to the depth of the pond at the desired final location.

3. Bring the unit back to the final position. There should be enough slack on the electric cord to allow it to hang straight down without tension on

the unit causing it to tilt the spray pattern.

4. Hold the position of the unit in the water by tying the mooring liness to the mooring stakes on shore.

5. Motor torque causes the unit to try to rotate. Upon startup, watch to make sure the unit cannot rotate more than 1/3 of a turn. If it is allowed to

rotate, the electric cord can pull around the unit very tightly and cause damage.

6. Never allow long lengths of rope to float near the intake of the unit where it can be pulled in and entangled in the propeller or impeller.

MOORING EYE

BOTTOM OF POND

1 0

INSTALLATION

SELECT SERIES

MOORING - FLOATING UNITS

FINAL LOCATION OF UNIT

FLOAT EYEBOLT

Aqua Control, Inc. 60 Hz. Select Series 2 Instruction Manual

LAUNCHING

MOORING EYE