- ページ 3
リフティングシステム Aqua Creek PATRIOT PORTABLE LIFTのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua Creek PATRIOT PORTABLE LIFT 17 ページ。
PATRIOT PORTABLE - ASSEMBLY INSTRUCTIONS
NOTE: If the PORTABLE KIT was purchased separately, proceed to step 4 below.
1. Begin by placing the parts from the previous page at or near to the desired
poolside location.
2. Stack 10 supplied weight plates on the portable platform. To ensure proper
alignment stack 3 to 4 plates, check alignment by temporarily putting the cover
on, remove the cover and then stack 3 to 4 more plates. Repeat until all 11 weight
plates are on the platform and properly aligned.
3. Attach the weight stack cover assembly over the weight stack using the supplied
¼ " N Y L O C K N U T S a n d ¼ " F L A T WA S H E R S . NOTE: Be sure to use silicone
to seal the flange before bolting together.
4. Bolt the Pro Pool Lift to the portable base plate using the supplied 1-2 " x 1 -1 / 4 "
countersunk flat head bolts, 1/2" flat washers and 1/2" nylon lock nuts.
3