Aqua Creek PATRIOT PORTABLE LIFT 설치 및 운영 지침 매뉴얼 - 페이지 3

{카테고리_이름} Aqua Creek PATRIOT PORTABLE LIFT에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek PATRIOT PORTABLE LIFT 17 페이지.

PATRIOT PORTABLE - ASSEMBLY INSTRUCTIONS

NOTE: If the PORTABLE KIT was purchased separately, proceed to step 4 below.

1. Begin by placing the parts from the previous page at or near to the desired

poolside location.

2. Stack 10 supplied weight plates on the portable platform. To ensure proper

alignment stack 3 to 4 plates, check alignment by temporarily putting the cover

on, remove the cover and then stack 3 to 4 more plates. Repeat until all 11 weight

plates are on the platform and properly aligned.

3. Attach the weight stack cover assembly over the weight stack using the supplied

¼ " N Y L O C K N U T S a n d ¼ " F L A T WA S H E R S . NOTE: Be sure to use silicone

to seal the flange before bolting together.

4. Bolt the Pro Pool Lift to the portable base plate using the supplied 1-2 " x 1 -1 / 4 "

countersunk flat head bolts, 1/2" flat washers and 1/2" nylon lock nuts.