- ページ 11

リフティングシステム Aqua Creek Products REVOLUTION LIFT SD SLING F-706RLSSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Aqua Creek Products REVOLUTION LIFT SD SLING F-706RLSS 20 ページ。

ページを印刷する

STEP 5: ASSEMBLE SLING & HANGER

The SLING & HANGER assembly will need to be put together and adjusted before it can be

hung from the seat arm. To do this, find the SLING, CHAIN-SETS, SLING-BARS and S-

HOOKS. Install the four (4) SLING-BARS into the sling-bar pockets in the sling. The hole in

the bar will be visible in the middle of the pocket. Attach an S-HOOK to each SLING-BAR

at the center hole, and the other end of the S-HOOK to the end of a chain as shown above.

The Sling will hang like a chair, as shown above-right, when installed properly.

A l t e r n a t i v e l y , t h e l e n g t h o f e a c h s i d e ma y b e a d j u s t e d t o g i v e mo r e o f a " r e c l i n i n g " p o s t u r e .

Attach the chains to the hanger as shown above. The length of the sling is adjustable by

shortening the chains. Make sure to use the same number link (from the end) to keep the

chain lengths even.