Aqua Creek Products REVOLUTION LIFT SD SLING F-706RLSS 매뉴얼 - 페이지 11
{카테고리_이름} Aqua Creek Products REVOLUTION LIFT SD SLING F-706RLSS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products REVOLUTION LIFT SD SLING F-706RLSS 20 페이지.
페이지 인쇄STEP 5: ASSEMBLE SLING & HANGER
The SLING & HANGER assembly will need to be put together and adjusted before it can be
hung from the seat arm. To do this, find the SLING, CHAIN-SETS, SLING-BARS and S-
HOOKS. Install the four (4) SLING-BARS into the sling-bar pockets in the sling. The hole in
the bar will be visible in the middle of the pocket. Attach an S-HOOK to each SLING-BAR
at the center hole, and the other end of the S-HOOK to the end of a chain as shown above.
The Sling will hang like a chair, as shown above-right, when installed properly.
A l t e r n a t i v e l y , t h e l e n g t h o f e a c h s i d e ma y b e a d j u s t e d t o g i v e mo r e o f a " r e c l i n i n g " p o s t u r e .
Attach the chains to the hanger as shown above. The length of the sling is adjustable by
shortening the chains. Make sure to use the same number link (from the end) to keep the
chain lengths even.
11