- ページ 16

CDプレーヤー AVM EVOLUTION CD2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AVM EVOLUTION CD2 19 ページ。 Cd-player evolution

CARE OF THE CASING

The surface and printed text on the casing are largely scratch resistant. The casing may be cleaned with a

mild soap solution or spirit based glass cleaner (use economically) and a soft lint free cloth.

NOTE: Care should be taken during cleaning to ensure that no liquids can ingress into the casing. It is

advised for safety reasons that the power cable is removed from the electrical supply before cleaning the

casing with a damp cloth.

Do not use solvents or abrasives for cleaning. This could damage the surface or text.

IF AT FIRST YOU DON'T SUCCEED....

Some suspected defects of the equipment are in fact very often found to have arisen from faulty operation.

Sometimes a malfunctioning item of ancillary equipment connected to the C02 unit is to blame. Before you

consult your dealer or contact us, we would like you

check the items on the folloWing list to see whet-

her you can correct the malfunction yourself.

Display not lit although the C02 unit is switched on.

Press the

DISPLAY OFF

button

(13) ;

the display will switch on.

CD tray closes but the contents ofthe CD are not displayed and the player cannot be operated.

Either a soiled/defective CD has been inserted or the CD has been placed in the tray upside down (CD label

facing downwards instead of being visible). Press button OPEN (9), the tray will open and the CD can be

removed. Incorrectly located COs should be laid the right way up. Soiled COs should be cleaned before

replacing in the tray.

No musical playback although the display shows "PLAY" or "PPLAY"

a) Check whether PAUSE is activated and when necessary deactivate by pressing the PAUSE buttons

(11,30).

b) Check the connection of the C02 unit to the amplifier or D/A converter (plugs loose, cables kinked etc).

Remote control does not work:

a) The remote control battery is empty.

b) There is no line of sight between the remote control and the C02 unit (infra-red light provides the

communication signal).