AVM EVOLUTION CD2 Operating Instructions Manual - Page 16

Browse online or download pdf Operating Instructions Manual for CD Player AVM EVOLUTION CD2. AVM EVOLUTION CD2 19 pages. Cd-player evolution

Print Page
CARE OF THE CASING
The surface and printed text on the casing are largely scratch resistant. The casing may be cleaned with a
mild soap solution or spirit based glass cleaner (use economically) and a soft lint free cloth.
NOTE: Care should be taken during cleaning to ensure that no liquids can ingress into the casing. It is
advised for safety reasons that the power cable is removed from the electrical supply before cleaning the
casing with a damp cloth.
Do not use solvents or abrasives for cleaning. This could damage the surface or text.
IF AT FIRST YOU DON'T SUCCEED....
Some suspected defects of the equipment are in fact very often found to have arisen from faulty operation.
Sometimes a malfunctioning item of ancillary equipment connected to the C02 unit is to blame. Before you
consult your dealer or contact us, we would like you
to
check the items on the folloWing list to see whet-
her you can correct the malfunction yourself.
Display not lit although the C02 unit is switched on.
Press the
DISPLAY OFF
button
(13) ;
the display will switch on.
CD tray closes but the contents ofthe CD are not displayed and the player cannot be operated.
Either a soiled/defective CD has been inserted or the CD has been placed in the tray upside down (CD label
facing downwards instead of being visible). Press button OPEN (9), the tray will open and the CD can be
removed. Incorrectly located COs should be laid the right way up. Soiled COs should be cleaned before
replacing in the tray.
No musical playback although the display shows "PLAY" or "PPLAY"
a) Check whether PAUSE is activated and when necessary deactivate by pressing the PAUSE buttons
(11,30).
b) Check the connection of the C02 unit to the amplifier or D/A converter (plugs loose, cables kinked etc).
Remote control does not work:
a) The remote control battery is empty.
b) There is no line of sight between the remote control and the C02 unit (infra-red light provides the
communication signal).
34