AVM EVOLUTION CD2 Operating Instructions Manual - Page 15

Browse online or download pdf Operating Instructions Manual for CD Player AVM EVOLUTION CD2. AVM EVOLUTION CD2 19 pages. Cd-player evolution

Print Page
SPECIAL FUNCTIONS
If you press the button PROGRAM
(23)
during playback or the
C02
is pausing a sub menu is opened which
offers the following special functions.
Polarity
With the buttons SEARCH'" (25) or SEARCH'" (24) the phase position of the output signal can be
rotated through 180
0.
By pressing the button SEARCH'" (24) the phase position of the output signal is
inverted and in the lower row of the display a minus sign ("-") appears under the word "POl". The output
signal reverts to its normal phase position when the button SEARCH'" (25) is pressed. In the display a pi us
sign ("+") appears.
Filter characteristics
With the buttons SKIP... (27) or SKIP'" (26) you can change over the filter characteristics of the digital
filters. By pressing the button SKIP'" (26) the "slow" variation is selected. In the display the word "slow"
appears beneath the entry "FllT". With the button SKIP... (27) the "sharp" variation is selected. This again
is shown in the display under "FllT".
Both filter variations are only distinct from each other, due to the different calculation statements, in their
tonal qualities or the "musical flow", because, in contrast to conventional CO player concepts, the entire
audio frequency band is transferred. This applies even
to
the flat sloping flank of the "slow" filter.
Sampling rate
By pressing the button TIME (29) the sampling frequency of the
O/A
converter can be changed between 96
kHz and 88.2 kHz.
To leave the sub menu press either the button PROGRAM
(23)
again or any other button that is not requi-
red in the selection of options within the sub menu.
TIP:AII selection made in the sub menu are retained even when the
C02
is switched off at the main switch
(2).
These selections are only extinguished when the
C02
is completely separated from the mains power
supply.
33