- ページ 11
ラボラトリー機器 AB Sciex 4000 QTRAPのPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。AB Sciex 4000 QTRAP 18 ページ。
ページを印刷する
Instrument Safe Fluids
The following fluids can safely be used with the instrument:
Note: This list is not complete. If you are uncertain about a specific fluid, do not use the
fluid until confirmation is received from AB SCIEX that it will not present a hazard.
Source/Gas Parameters
The parameters in
flow rate. For more information about the parameters, see the Analyst
Help system.
Note: We recommend that you run the instrument with the Curtain Gas
least 20 to maintain good instrument performance.
Table 1-2 Source/Gas Parameters
Curtain Gas (CUR)
IonSpray Voltage (IS)
Temperature (TEM)
Ion Source Gas (GS1)
Ion Source Gas 2 (GS2)
Turbo V™ Ion Source Settings
Table 1-3
parameters. For more information, see the Turbo V™ Ion Source Operator's
Guide.
Table 1-3 Vertical and Horizontal Parameters
X-axis
Y-axis
Document Number: D1000092200 B
6. Turn on the computer, if it was turned off, and then start the Analyst
software.
•
Methanol (0 to 100%)
•
Acetonitrile (0 to 100%)
•
Water
•
Formic acid (0 to 1%)
•
Ammonium acetate (0 to 1%)
Table 1-2
Parameter
shows the recommended starting values for the X- and Y-axis
Parameter
are optimized for different LC conditions involving
Value
20
5000
700
60
60
Value
5
5
Hardware Guide
®
software
®
™
flow set to at
11