AB Sciex 4000 QTRAP Manual Perangkat Keras - Halaman 11
Jelajahi secara online atau unduh pdf Manual Perangkat Keras untuk Peralatan Laboratorium AB Sciex 4000 QTRAP. AB Sciex 4000 QTRAP 18 halaman.
Halaman Cetak
Instrument Safe Fluids
The following fluids can safely be used with the instrument:
Note: This list is not complete. If you are uncertain about a specific fluid, do not use the
fluid until confirmation is received from AB SCIEX that it will not present a hazard.
Source/Gas Parameters
The parameters in
flow rate. For more information about the parameters, see the Analyst
Help system.
Note: We recommend that you run the instrument with the Curtain Gas
least 20 to maintain good instrument performance.
Table 1-2 Source/Gas Parameters
Curtain Gas (CUR)
IonSpray Voltage (IS)
Temperature (TEM)
Ion Source Gas (GS1)
Ion Source Gas 2 (GS2)
Turbo V™ Ion Source Settings
Table 1-3
parameters. For more information, see the Turbo V™ Ion Source Operator's
Guide.
Table 1-3 Vertical and Horizontal Parameters
X-axis
Y-axis
Document Number: D1000092200 B
6. Turn on the computer, if it was turned off, and then start the Analyst
software.
•
Methanol (0 to 100%)
•
Acetonitrile (0 to 100%)
•
Water
•
Formic acid (0 to 1%)
•
Ammonium acetate (0 to 1%)
Table 1-2
Parameter
shows the recommended starting values for the X- and Y-axis
Parameter
are optimized for different LC conditions involving
Value
20
5000
700
60
60
Value
5
5
Hardware Guide
®
software
®
™
flow set to at
11