- ページ 3

スイッチ Avocent DSR Series DSR1021のPDF ファームウェア・リリース・ノートをオンラインで閲覧またはダウンロードできます。Avocent DSR Series DSR1021 3 ページ。 Kvm switching systems
Avocent DSR Series DSR1021 にも：パンフレット (2 ページ), リリースノート (3 ページ), ファームウェア・リリース・ノート (3 ページ), ファームウェア・リリース・ノート (3 ページ), ファームウェア・リリース・ノート (3 ページ), リリースノート (3 ページ), リリースノート (2 ページ), クイック・インストール・マニュアル (2 ページ), リリースノート (2 ページ), 補足マニュアル (2 ページ), パンフレット (2 ページ)

6. Resolved issue where characters were dropped when typing extremely fast. The switch now

supports typing at up to 1800 characters per minute.

7. Resolved issue where portions of the DSR switch's Avocent-proprietary SNMP MIB were readable

via an SNMP walk utility. The entire Avocent-proprietary MIB is now only accessible via DSView 3

software.

=============================================================================

This release contains no known issues.

=============================================================================

If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch

is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:

1. Set up the TFTP server with server IP address 10.0.0.3.

2. Rename the flash update file to the appropriate filename from the following list and place it into the

appropriate directory on the TFTP server.

DSR1021, DSR1022

DSR1024

DSR1031

DSR1020, DSR2020, DSR4020

DSR8020

DSR1030, DSR2030, DSR4030, DSR8030

DSR2035, DSR8035

3. If the DSR switch is not on, turn it on now.

4. The recovery process will start automatically.

NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the

Internet that you can download and install.

Known Issues

FLASH Update Failure Recovery

Switch

Filename

DSR1021.fl

DSR1024.fl

DSR1031.fl

DSRxx20.fl

DSR8020.fl

DSRxx30.fl

DSR8035.fl