Avocent DSR Series DSR1021 Informacje o wersji oprogramowania sprzętowego - Strona 3

Przeglądaj online lub pobierz pdf Informacje o wersji oprogramowania sprzętowego dla Przełącznik Avocent DSR Series DSR1021. Avocent DSR Series DSR1021 3 stron. Kvm switching systems
Również dla Avocent DSR Series DSR1021: Broszura (2 strony), Uwaga dotycząca wydania (3 strony), Informacje o wersji oprogramowania sprzętowego (3 strony), Informacje o wersji oprogramowania sprzętowego (3 strony), Informacje o wersji oprogramowania sprzętowego (3 strony), Uwaga dotycząca wydania (3 strony), Uwaga dotycząca wydania (2 strony), Instrukcja szybkiej instalacji (2 strony), Uwaga dotycząca wydania (2 strony), Podręcznik uzupełniający (2 strony), Broszura (2 strony)

Avocent DSR Series DSR1021 Informacje o wersji oprogramowania sprzętowego
6. Resolved issue where characters were dropped when typing extremely fast. The switch now
supports typing at up to 1800 characters per minute.
7. Resolved issue where portions of the DSR switch's Avocent-proprietary SNMP MIB were readable
via an SNMP walk utility. The entire Avocent-proprietary MIB is now only accessible via DSView 3
software.
=============================================================================
=============================================================================
This release contains no known issues.
=============================================================================
=============================================================================
If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch
is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:
1. Set up the TFTP server with server IP address 10.0.0.3.
2. Rename the flash update file to the appropriate filename from the following list and place it into the
appropriate directory on the TFTP server.
DSR1021, DSR1022
DSR1024
DSR1031
DSR1020, DSR2020, DSR4020
DSR8020
DSR1030, DSR2030, DSR4030, DSR8030
DSR2035, DSR8035
3. If the DSR switch is not on, turn it on now.
4. The recovery process will start automatically.
NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the
Internet that you can download and install.
Known Issues
FLASH Update Failure Recovery
Switch
Filename
DSR1021.fl
DSR1024.fl
DSR1031.fl
DSRxx20.fl
DSR8020.fl
DSRxx30.fl
DSR8035.fl